*** BIG SAVINGS ***
This bundle saves you over $90 off the price of the Deluxe Gun!
- Clean, Clear, Drip-Free Rustproofing
- Lubricant & Penetrant
- Excellent inner and outer panel protection
- Thousands of uses
Rust Cure 3000 combines moisture displacing abilities with lubricating benefits. Exclusive formula can be applied to all metals, plastics and vinyl. Works to dissolve and flush away rust and corroded contaminates. Leaves a superior lubricating film providing long term protection to seams, crevices and hidden areas. Safe for electronics, paint or vinyl surfaces. Use on vehicles, farm equipment, boats, planes, garden equipment, snow machines and jet skis, salt and fertilizer spreaders, hinges, locks, guns and anything that moves or requires protection from the elements. Apply liberally. Allow to soak in. Treat metal seams, lapped joints and spot welds. Spray electrical connectors, contacts, switches, light sockets and electric motors for protection against seizure and malfunction. Will also unseize previously unprotected items. Periodic applications provide maximum protection.
Included with the kit is a 45 degree x 10″ hook wand with top quality 18″ flex hose, a round nozzle for direct application and a quick coupler on the gun to allow fast changes between nozzle and wand. Gun item number L015-201.
Note: Warranty only applies to vehicles those application was done at a Certified Corrosion FREE Zone dealer. Product purchases do not authorize you to advertise or use any of Corrosion Free trademarks.
RP-460 HD Gun Tips:
If you have never used the gun before it does take some getting used to the gun.
We recommend keeping the pressure between 80-100 PSI. The gun has a 2 stage trigger. Stage 1 is air only. Stage 2 is air and full-throttle product. You will never need to have the trigger pressed full-throttle, that will give you too much product. Try pulling the trigger to the first stage of air only and then feathering/pulsing your fingering into stage 2, which will mix the product with the air and will apply a thin layer. You will find it doesn’t take much feathering of the trigger to bring the product up.
The beauty of mixing the product with air (atomizing it) you use less product and it creates a thin layer on the vehicle. When using the wands if you find you have accidentally applied too much, simply use the first stage of the trigger which is air only, and move the product around.
Also, you want to product (not air temperature) to be warm. Minimum above 70F, the warmer the product the thinner it becomes, naturally.