Rust Cure Formula 3000 DIY Deluxe Kit with RP-460HD

Starting at: $308.50

Rust Cure Formula 3000 DIY Deluxe Kit with RP-460HD

Rust Cure Formula 3000 with CSC 850 Rustproofing, DIY Kit includes RP-460 HD Applicator Gun with wands 120 PSI Max, your choice of 1G (4L) or 5G (20L) Jug of Rust Cure.

Starting at: $308.50


This bundle saves you over $90 off the price of the Deluxe Gun! 

Rust Cure Formula 3000 with CSC 850 Rustproofing, DIY Kit includes RP-460 HD Applicator Gun & Wands  120 PSI Max, your choice of 1G (4L) or 5G (20L) Jug of Rust Cure.

  • Clean, Clear, Drip-Free Rustproofing
  • Lubricant & Penetrant
  • Excellent inner and outer panel protection
  • Thousands of uses

Rust Cure 3000 combines moisture displacing abilities with lubricating benefits. Exclusive formula can be applied to all metals, plastics and vinyl. Works to dissolve and flush away rust and corroded contaminates. Leaves a superior lubricating film providing long term protection to seams, crevices and hidden areas. Safe for electronics, paint or vinyl surfaces. Use on vehicles, farm equipment, boats, planes, garden equipment, snow machines and jet skis, salt and fertilizer spreaders, hinges, locks, guns and anything that moves or requires protection from the elements. Apply liberally. Allow to soak in. Treat metal seams, lapped joints and spot welds. Spray electrical connectors, contacts, switches, light sockets and electric motors for protection against seizure and malfunction. Will also unseize previously unprotected items. Periodic applications provide maximum protection.

Deluxe Gun with Wands

Included with the kit is a 45 degree x 10″ hook wand with top quality 18″ flex hose, a round nozzle for direct application and a quick coupler on the gun to allow fast changes between nozzle and wand.  Gun item number L015-201.

Note: Warranty only applies to vehicles those application was done at a Certified Corrosion FREE Zone dealer.  Product purchases do not authorize you to advertise or use any of Corrosion Free trademarks.




RP-460 HD Gun Tips:

If you have never used the gun before it does take some getting used to the gun.

We recommend keeping the pressure between 80-100 PSI.   The gun has a 2 stage trigger.  Stage 1 is air only.  Stage 2 is air and full-throttle product.  You will never need to have the trigger pressed full-throttle, that will give you too much product.  Try pulling the trigger to the first stage of air only and then feathering/pulsing your fingering into stage 2, which will mix the product with the air and will apply a thin layer.  You will find it doesn’t take much feathering of the trigger to bring the product up.

The beauty of mixing the product with air (atomizing it) you use less product and it creates a thin layer on the vehicle.  When using the wands if you find you have accidentally applied too much, simply use the first stage of the trigger which is air only, and move the product around.

Also, you want to product (not air temperature) to be warm.  Minimum above 70F, the warmer the product the thinner it becomes, naturally.

RP-460 HD Gun Cleaning Tips:

Our product does not dry up and does not harm the gun so there is no need to clean the gun after use.
If it is necessary to clean it, we recommend an alkaline wash (an engine degreaser or warm water and blue dawn dish soap).  You would want to rinse thoroughly as the product used to clean left in the gun can damage the inside of the gun.
Weight 1 kg
Dimensions 1 × 1 × 1 in

Product Video

Product Benefits

• Super Heavy Duty Rust & Corrosion Protection
• Prevents the start of corrosion in seams and crevices – maintains structural integrity of metals.
• Removes and displaces moisture in hidden cavities,including salt water.
• Prevents paint blistering at edge of overlapped seams.
• Protects underbody – fuel and brake lines.
• Protects against abrasion between painted and vinyl surfaces.
• Dissolves and neutralizes existing rust and corrosion.
• Penetrates deeply and lubricates.
• Stops electrolysis between dissimilar metals.
• Restores UV-damaged rubber and vinyl.
• Non-flammable as a liquid, non-conductive, non-toxic, non-carcinogenic, no solvents, no odors or toxic fumes.
• Not a sealant – will not trap moisture against metal.
• Clean, clear, invisible, with no sticky messy residue

Application Gun Comparison

You can download the PDF version here.

Rust cure application guns

75 reviews for Rust Cure Formula 3000 DIY Deluxe Kit with RP-460HD

Powered byCusRev
Based on 75 reviews
Showing 11 of 75 reviews (4 star). See all 75 reviews
  1. Anonymous (verified owner)

    Really good kit!, the pistol is more or less difficult to handle but as the website says, you get used to it, the liquid is just not enough for a car. I had to order a barrel, still really happy with the profuct!

  2. Stan S. (verified owner)

    Not used yet but delivery and ordering was quick and easy. Thx
    Won’t use until summer time.

  3. James (verified owner)

    Discovered this product based on the DRDC anti-corrosion study. I live in Eastern Ontario where salt and brine solutions are used >4 months a year and rust protection is a must. I’ve been using Corrosion Free 3000 for the last three winters and can attest to minimal dripping, great adhesion to metal, no smell, easy cleanup, and the creeping action is visible >12 months after application.

    No rust has developed on frame, frame welds, drivetrain components, or body panels since I first started using the product.

    I apply the product mid-summer when it’s hot (25*C-30*C) to allow for maximum creeping into corners/seams/welds by winter.

    The Applicator gun itself I’d give 4/5 stars. I upgraded to this RP-460HD gun for the attachments (wands/yellow lines for interior body panels and doors are great), but when applying to large surfaces (e.g. frame/undercarriage/suspension of truck) it was more difficult to regulate product application than I am used to.

    **The RP-460HD gets 4/5 stars (was a bit less value-for-money than I’d hoped)**

    **Overall Corrosion Free 3000 product gets 5/5 stars.**

  4. Tyler Robinson (verified owner)

    best product on the market

  5. REGINALD CIPRIANI (verified owner)

    Arrived the next day. Ready to use out of the box. Initial upfront price but overall I’m very happy with my purchase. Remember to tighten everything some leakage and mess can occur.

  6. TOM (verified owner)

    I like the kit, however thought that the kit would have more oil product for the price I paid.
    Hopefully it works!

  7. Bryan (verified owner)

    Good product. Instructions that come with the gun and online video contradict eachother with how much pressure to run on the gun and how much product will be dispensed based on pressure. Also found 4L jug for a better price in store than was offered as part of the package deal….

  8. Richard S. (verified owner)

    Rigid tubing for the gun would work better for spraying the inner panels of a pick up box

  9. YUE MING (verified owner)

  10. Brad Parcher (verified owner)

  11. Lorin (verified owner)

    Product was delivered quickly. Only complaint is that the spray gun had a very minimal instruction manual with it, with no information on how to clean the gun effectively after use (i.e., what solvent to use, what parts to clean, etc).

    • Sarah Duncan (store manager)

      Thank you for your feedback. We will work on improving this in the future, in the meantime please note some tips regarding cleaning the gun. If you are planning on using the gun exclusively for our product, we don’t recommend cleaning it. Our product will not dry up and will not damage any internal components. If it is necessary to clean it, use an alkaline wash (water and blue dawn dish soap, or an engine degreaser). You would want to rinse thoroughly as the product used to clean left in the gun can damage the inside of the gun. All the best! The Corrosion Free Team

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top