CLEAN CLEAR DRIPLESS ODOURLESS RUST PROTECTION

Rust Cure Formula 3000 DIY Deluxe Kit with RP-460HD

Starting at: $308.50

Rust Cure Formula 3000 DIY Deluxe Kit with RP-460HD

Rust Cure Formula 3000 with CSC 850 Rustproofing, DIY Kit includes RP-460 HD Applicator Gun with wands 120 PSI Max, your choice of 1G (4L) or 5G (20L) Jug of Rust Cure.

Starting at: $308.50

*** BIG SAVINGS ***

This bundle saves you over $90 off the price of the Deluxe Gun! 

Rust Cure Formula 3000 with CSC 850 Rustproofing, DIY Kit includes RP-460 HD Applicator Gun & Wands  120 PSI Max, your choice of 1G (4L) or 5G (20L) Jug of Rust Cure.

  • Clean, Clear, Drip-Free Rustproofing
  • Lubricant & Penetrant
  • Excellent inner and outer panel protection
  • Thousands of uses

Rust Cure 3000 combines moisture displacing abilities with lubricating benefits. Exclusive formula can be applied to all metals, plastics and vinyl. Works to dissolve and flush away rust and corroded contaminates. Leaves a superior lubricating film providing long term protection to seams, crevices and hidden areas. Safe for electronics, paint or vinyl surfaces. Use on vehicles, farm equipment, boats, planes, garden equipment, snow machines and jet skis, salt and fertilizer spreaders, hinges, locks, guns and anything that moves or requires protection from the elements. Apply liberally. Allow to soak in. Treat metal seams, lapped joints and spot welds. Spray electrical connectors, contacts, switches, light sockets and electric motors for protection against seizure and malfunction. Will also unseize previously unprotected items. Periodic applications provide maximum protection.

Deluxe Gun with Wands

Included with the kit is a 45 degree x 10″ hook wand with top quality 18″ flex hose, a round nozzle for direct application and a quick coupler on the gun to allow fast changes between nozzle and wand.  Gun item number L015-201.

Note: Warranty only applies to vehicles those application was done at a Certified Corrosion FREE Zone dealer.  Product purchases do not authorize you to advertise or use any of Corrosion Free trademarks.

 

 

 

RP-460 HD Gun Tips:

If you have never used the gun before it does take some getting used to the gun.

We recommend keeping the pressure between 80-100 PSI.   The gun has a 2 stage trigger.  Stage 1 is air only.  Stage 2 is air and full-throttle product.  You will never need to have the trigger pressed full-throttle, that will give you too much product.  Try pulling the trigger to the first stage of air only and then feathering/pulsing your fingering into stage 2, which will mix the product with the air and will apply a thin layer.  You will find it doesn’t take much feathering of the trigger to bring the product up.

The beauty of mixing the product with air (atomizing it) you use less product and it creates a thin layer on the vehicle.  When using the wands if you find you have accidentally applied too much, simply use the first stage of the trigger which is air only, and move the product around.

Also, you want to product (not air temperature) to be warm.  Minimum above 70F, the warmer the product the thinner it becomes, naturally.

RP-460 HD Gun Cleaning Tips:

Our product does not dry up and does not harm the gun so there is no need to clean the gun after use.
If it is necessary to clean it, we recommend an alkaline wash (an engine degreaser or warm water and blue dawn dish soap).  You would want to rinse thoroughly as the product used to clean left in the gun can damage the inside of the gun.
Weight 1 kg
Dimensions 1 × 1 × 1 in

Product Video

Product Benefits

• Super Heavy Duty Rust & Corrosion Protection
• Prevents the start of corrosion in seams and crevices – maintains structural integrity of metals.
• Removes and displaces moisture in hidden cavities,including salt water.
• Prevents paint blistering at edge of overlapped seams.
• Protects underbody – fuel and brake lines.
• Protects against abrasion between painted and vinyl surfaces.
• Dissolves and neutralizes existing rust and corrosion.
• Penetrates deeply and lubricates.
• Stops electrolysis between dissimilar metals.
• Restores UV-damaged rubber and vinyl.
• Non-flammable as a liquid, non-conductive, non-toxic, non-carcinogenic, no solvents, no odors or toxic fumes.
• Not a sealant – will not trap moisture against metal.
• Clean, clear, invisible, with no sticky messy residue

Application Gun Comparison

You can download the PDF version here.

Rust cure application guns

74 reviews for Rust Cure Formula 3000 DIY Deluxe Kit with RP-460HD

Powered byCusRev
4.7
Based on 74 reviews
Showing 4 of 74 reviews (3 star). See all 74 reviews
  1. Maryann Emery (verified owner)

    I got the stuff. However there were no instructions. Sprayed like crazy. Hope it works. We have very poor Internet out here in the mountains. I believe that you should provide written instructions. [This is from husband of Maryann. She would never do this!]

  2. Mike G.

    The corrosion free product is amazingly effective. However, applying it with the gun is not as smooth as shown. Is the gel supposed to be heated to a certain temperature (to be less viscous) before it is applied?

  3. darren lewis (verified owner)

    Product is the best stuff I have ever used. But the spray gun and kit did not perform as well as it showed in the videos. I may have been doing something wrong. I wish i would have taken before and after pictures. This stuff really is amazing. I am recommending to everyone i know.

    • Sarah Duncan (store manager)

      Hi Darren, the rustproofing gun can take some getting used to, it is a 2 stage trigger. We are happy to give you some tips for your next application please let us know. Thank you!

  4. Kirby O’Donnell (verified owner)

    Have not used it yet

Add a review

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top