*** BIG SAVINGS ***
This bundle saves you over $90 off the price of the Deluxe Gun!
Rust Cure Formula 3000 with CSC 850 Rustproofing, DIY Kit includes RP-460 HD Applicator Gun & Wands 120 PSI Max, your choice of 1G (4L) or 5G (20L) Jug of Rust Cure.
- Clean, Clear, Drip-Free Rustproofing
- Lubricant & Penetrant
- Excellent inner and outer panel protection
- Thousands of uses
Rust Cure 3000 combines moisture displacing abilities with lubricating benefits. Exclusive formula can be applied to all metals, plastics and vinyl. Works to dissolve and flush away rust and corroded contaminates. Leaves a superior lubricating film providing long term protection to seams, crevices and hidden areas. Safe for electronics, paint or vinyl surfaces. Use on vehicles, farm equipment, boats, planes, garden equipment, snow machines and jet skis, salt and fertilizer spreaders, hinges, locks, guns and anything that moves or requires protection from the elements. Apply liberally. Allow to soak in. Treat metal seams, lapped joints and spot welds. Spray electrical connectors, contacts, switches, light sockets and electric motors for protection against seizure and malfunction. Will also unseize previously unprotected items. Periodic applications provide maximum protection.
Included with the kit is a 45 degree x 10″ hook wand with top quality 18″ flex hose, a round nozzle for direct application and a quick coupler on the gun to allow fast changes between nozzle and wand. Gun item number L015-201.
Note: Warranty only applies to vehicles those application was done at a Certified Corrosion FREE Zone dealer. Product purchases do not authorize you to advertise or use any of Corrosion Free trademarks.
RP-460 HD Gun Tips:
If you have never used the gun before it does take some getting used to the gun.
We recommend keeping the pressure between 80-100 PSI. The gun has a 2 stage trigger. Stage 1 is air only. Stage 2 is air and full-throttle product. You will never need to have the trigger pressed full-throttle, that will give you too much product. Try pulling the trigger to the first stage of air only and then feathering/pulsing your fingering into stage 2, which will mix the product with the air and will apply a thin layer. You will find it doesn’t take much feathering of the trigger to bring the product up.
The beauty of mixing the product with air (atomizing it) you use less product and it creates a thin layer on the vehicle. When using the wands if you find you have accidentally applied too much, simply use the first stage of the trigger which is air only, and move the product around.
Also, you want to product (not air temperature) to be warm. Minimum above 70F, the warmer the product the thinner it becomes, naturally.
David H. (verified owner) –
I think this product will be good at preventing rust based on other reviews and studies. What was not made clear in the product documentation or phone conversation with the company is that you CAN NOT apply this product except when it is hot out. Saying that the product works better in warm weather is a big understatement – it should say ONLY APPLY IN HOT WEATHER. I warmed the product as recommended via a phone call with Corrosion Free, but once it hits the cool vehicle it doesn’t flow/seep at all. It was around 10 degrees Celsius when I applied it. So it was frustrating trying to get the product to cover my vehicles and I used way more product than if it was warm out. I will try again when it is hot out and then I think it will perform much better. Also the 360 degree nozzle didn’t work very well and was hard to trouble shoot once the slippery product was present, so I just used the other tips. Bottom line – if applying a rust inhibitor in cool or cold weather use a thinner product like Krown so that it is easier to apply and will seep into the small cracks.